SKYWAN Satellite Router
SKYWAN is a highly flexible and versatile MF-TDMA VSAT system for establishing wide area networks. Acting as IP routers the SKYWAN network integrates seamlessly. It enables mobile and transportable applications with fixed and on-the-move antennas with highest performance and link availability. Through its fully dynamic bandwidth allocation scheme SKYWAN provides instant bandwidth-on-demand for superior voice and high definition video quality. SKYWAN transmits traffic bursts with dynamic data rates from 4 Kbit/s up to 100 Mbit/s per site and enables high speed, hub-less communication between all sites. Any site can be reached via a single encrypted satellite hop connection supporting fully meshed network topologies.
SKYWAN 5G is the All-IP platform that targets commercial markets like cellular networks and service providers requiring virtual routing or trunking capabilities to serve multiple customers per terminal or are demanding for high IP throughput in star or mesh networks.
With SKYWAN 5G each node may become TDMA network controller, or allows DVB-S2 transmissions to/from every node or even scale performance like a hub when using the cascading option. Multiple warm-standby backup devices increase the node availability even for cascaded nodes.
SKYWAN 5G networks have up to 16 TDMA channels with load balancing and virtual routing functions (VRF). Each TDMA channel can be unique with a ModCod from BPSK up to 16-APSK. Payload compression for TCP/UDP/IP and GTP as used by LTE eNodeBs in combination with the efficient dynamic bandwidth assignment and hardware link encryption (AES-256) further boosts data throughput in full meshed single-hop hub-less topologies.
With DVB-S2 in addition a mix of transmission technologies (MF-TDMA plus DVB-S2) opens the sky to get more throughput and new kinds of applications that avoid a central hub and traffic bottlenecks.
Multiple SKYWAN 5G networks are configured remotely with your preferred browser and an NMS appliance that uses transactions to modify parameters in the live networks. Transactions automatically perform a controlled roll-back in case of failures or allow to undo last parameter modifications in the network. All NMS configuration communication uses only secure communication when upgrading software on the nodes or changing one or multiple parameters in a transaction.
As soon as your SKYWAN 5G network is operational, NMS is not required anymore - all traffic priorization for real-time or best effort traffic as supported by QoS mechanisms is implemented in each node.
SKYWAN 5G operators use HTTPS based GUIs to access all nodes or the NMS itself. For experts the NMS appliance and the SKYWAN 5G modems provide a command line interface with Cisco-style syntax for additional tool integration. The traditional management protocol SNMP is available for monitoring only. And in case you use the NMS appliance for service monitoring, additonal backup NMS appliances may be hosted anywhere to manage the SKYWAN 5G network.
SKYWAN 5G technology is available as scalable 1U indoor or ruggedized outdoor unit. It is integrated in the ManPack SPT 600M terminal or is used as the modem of choice integrated into lightweight manpack or flyaway mesh capable COTP terminals or packaged with on-the-move antennas for land- or sea-mobile COTM solutions.
Note: SKYWAN 7000 Series had reached its End of Sales (EoS) by 31. December 2019 with a subsequent software support phase (EoS +2 years). Customers can reach ND SATCOM Customer Service & Support for support services.
SKYWAN 5G
- Get all-in-one - the reliable ONE solution
- Gain flexible topology - star to mesh networks with virtual SCPC connections
- Gain space & portability - smallest unit available
- Gain powerful performance - with easy interface
- Generate savings - lower cost of ownership
The SKYWAN 5G represents the fifth generation of the SKYWAN product family. SKYWAN 5G transforms the way communication networks are created and behave by merging VSAT & comprehensive IT capabilities into ONE hardware device. SKYWAN 5G enables the most flexible, scalable and reliable VSAT networks ever. SKYWAN 5G is an MF-TDMA modem with integrated DVB-S2 receiver, allowing data to be transmitted in a single hop directly from their origin to their destination. Whatever type of network you request, from star to mesh or point-to-point, SKYWAN 5G reliably fits all topologies. One compact hardware and one identical software for all network roles simplify logistics, making hardware and software changes superfluous.
SKYWAN 5G's unprecedented scalability enables growth of your network in a very cost-efficient manner.
- SKYWAN 5G - The ONE (698.68 KB)
- SKYWAN 5G Product Update v1.6.138 (2.61 MB)
- SKYWAN Technology (1.85 MB)
- SKYWAN 5G DVB-S2 Solution (2.77 MB)
- SKYWAN 5G Training Services (148 KB)
- SKYWAN 5G NMS Datasheet (1.28 MB)
- SKYWAN 5G Datasheet (2.32 MB)
- SKYWAN 5G Outdoor Datasheet (1.73 MB)
- SKYWAN 5G Product Update v1.5.113 (1.39 MB)
- SKYWAN 5G Product Update v1.4.99 (2.35 MB)
SKYWAN Portable Terminal SPT 600 M
The lightweight SKYWAN Portable Terminal SPT 600 M is a compact VSAT with integrated SKYWAN 5G satellite router facilitating rapid deployment of high throughput for any to any connectivity across SKYWAN networks.The carbon fiber chassis of the SPT 600 M comprises all elements including the SKYWAN 5G modem, an Antenna Pointing Controller (APC), the internal AC and DC power supply, and the mounted BUC and LNB for immediate use. The APC display serves to aim the 60cm dish to lock into the proper SKYWAN MF-TDMA network, one button will activate transmission. Interface to the user is via two Ethernet ports to attach VoIP phones or any other IP devices.
Video for SPT 600 M- Extremely rugged with its IATA compliant case
- Universal AC and wide range DC power inputs
- On-air in less than 3 minutes to transfer voice or data
- The SPT 600 M may take the role of the hub in an All-Portable network with star or mesh topology
SKYWAN FAD Series
Several modular integrated access routers with adaptation to the ND SATCOM SKYWAN broadband VSAT system form a family of configurable extensions to achieve highest bandwidth efficiency for voice, data and video transmission using a complete set of analog and digital voice and data interfaces:
SKYWAN FAD 9120 1U unit for field offices
SKYWAN FAD 9140 1U unit for central and branch offices
SKYWAN FAD 9220 2U unit for field offices (replaced by FAD 9120/9140)
SKYWAN FAD 9230 2U unit for branch offices (replaced by FAD 9140)
SKYWAN FAD 8400 stand-alone unit or port extension for FAD 9120 or FAD 9220/9230
With slot cards each family member is configurable per hardware modules in addition to software services like OSPF or RIP routing, bridging and VLAN support, together with a wide range of supported synchronous and asynchronous serial data services.
SKYWAN FAD 9120
- SKYWAN FAD 9120 unit is a 1U solution for field offices
The SKYWAN FAD 9120 extends the SKYWAN FAD 9220 / 9230 and FAD 8400 Integrated Access Router family with its small 1U form factor with 2 expansion slots.
With its adaptation to the ND SATCOM SKYWAN broadband VSAT system highest bandwidth efficiency for voice, data and video transmission is achieved. This combination defines state-of-the-art communications in mission critical environments.
Its compression and multiplexing technology together with its prioritization capabilities make FAD the product of choice for satellite networks running converged voice and data applications in Air Traffic Control, Oil & Gas, Government, Military and Enterprise networks. It also allows seamless integration of terrestrial and satellite infrastructure into one unified network topology reducing cost and minimizing complexity.
A complete set of analog and digital voice interfaces (as known from the bigger variant FAD 9220) together with an unmatched support of signaling protocols enable flawless interconnectivity even with legacy PBX systems.
IP services like OSPF or RIP routing, bridging and VLAN support, together with a wide range of supported synchronous and asynchronous serial data services complement the FAD capabilities to be used as an all-purpose multi-service integrated access router.
SKYWAN FAD 9140
- SKYWAN FAD 9140 unit is a 1U solution for central and branch office levels
The SKYWAN family of VSAT networking products is complemented by the FAD 9140, a compact high performance universal access device of latest technology. The FAD 9140 is an application-aware router and multiplexer, combining the functionality of a data router, a multiplexer and a VHF/voice gateway in a single device, enabling organizations to create converged networks and transport any type of traffic over satellite.
The FAD 9140 is a high speed, low cost, flexible and compact unit that supports 16 analog or 120 digital telephony channels in a multitude of application scenarios. The universal access device provides concentration and switching of packetized voice as well as data from the LAN ports and/or the serial interfaces. Being specifically adapted to the SKYWAN VSAT system, the combination of both defines the state of the art for voice quality in packetized transmissions over satellite. Bandwidth usage is minimized through efficient compression and dynamically call set-up. Extension interface cards add optional hardware interfaces to the unit.
The FAD 9140 provides a safe migration path from legacy TDM or Frame Relay networks to IP-centric networks. It includes support for the latest VoIP (SIP) and Eurocae WG67 ED-136/137 standards and robust IP/Ethernet QoS, with eight classes of service and 16 levels of prioritization to ensure that mission-critical applications always receive sufficient bandwidth. In addition, specialty features are available for handling the particulars of radar, voice push-to-talk (PTT) and VHF voice applications common to Air Traffic Control and governmental networks.
IP services like OSPF or RIP routing, bridging and VLAN support, together with a wide range of supported synchronous and asynchronous serial data services complement the FAD capabilities to be used as an all-purpose multi-service integrated access router.
SKYWAN FAD 8400
The SKYWAN family of Frame Relay Access Devices is complemented by the SKYWAN FAD 8400, a device which supports serial ports only. The FAD 8400 enables enterprises and service providers to incrementally scale their network infrastructure as requirements for additional serial ports increase. It can be used stand-alone or to extend the three serial ports of the FAD 9120 or the FAD 9220/9230.The number of serial ports can be increased to whatever levels because multiple devices can be chained together. Since the FAD 8400 is an IP device with multiple connectivity options, it easily integrates into any network.
The FAD 8400 can handle framed serial traffic or support transport circuit emulation and then send the resulting data over SKYWAN networks. It supports the leading LAN and WAN interface protocols including Frame Relay, HDLC, PPP and Power Cell.
The FAD 8400 is available in two options:
- 4 serial ports
- 8 serial ports
Antenna Systems
ND SatCom’s high-end antenna systems have gained an outstanding international reputation for their innovative engineering and design. We offer antenna sub systems in multiple sizes for Ku- and Ka-band to be utilized in different situations. All our antenna systems highly satisfy customers' demands for stable & reliable transmissions and automatic pointing for SNG or mobile VSAT applications. Whether you are looking for a vehicle-mounted or an autonomous Fly-away system, ND SatCom has an antenna solution that fits!
Ka2Go for NewsSpotter
The Ka2Go terminal is the most reliable and advanced vehicle-mounted antenna system within ND SATCOM’s Ka-band antenna family for mobile VSAT. It is designed to fulfill the most demanding broadcasting needs within the Ka-band market.The Ka2Go terminal is based on a proven lightweight and robust design with a patented motorized positioner and an Automatic Pointing System to any satellite. This terminal supports the KA-SAT modem family and is an ideal solution for the EUTELSAT NewsSpotter service.This streamlined aerodynamic terminal has small dimensions allowing it to be mounted on any passenger vehicle. Ka2Go can be considered a “plug and play” terminal as it becomes operational by pressing only one button. The antenna consists of a high precision offset Ka-band reflector, GPS receiver, compass-enabling automatic pointing and automatic network acquisition. In addition to the antenna, the terminal integrates a KA-SAT modem, IP router and antenna controller.
Plug and Play
Ka2Go Terminal Pointing (4:22min, on Youtube)
- Go live quickly, from stowed to operational within 3 minutes
- Web interfacing through mobile device
- Integrated IP router
- Easy Operation – no technician needed
- Best automatic antenna pointing on the market
SKYRAY Light 1200
SKYRAY Light 1200 is ND SATCOM’s response to the demand for lightweight, yet robust automatically-pointing transmit and receive antennas for mobile IP VSAT and SNG applications. The system is easy to operate and provides an affordable communication infrastructure – anytime – anywhere – within minutes.The ND SATCOM SKYRAY Light 1200 is the perfect solution for mobile corporate communications, governmental institutions, relief organizations and broadcasters requiring reliable and secure real-time IP-based communication via satellite. Integrated in a stylish aerodynamic carbon-fiber casing, the antenna system can be quickly mounted on any vehicle. The system features a high performance 1.2 m antenna reflector, a rugged tri-axis positioner, GPS receiver, compass-enabling automatic pointing and automatic network acquisition.
- only one cable to antenna
- Maintenance free AZ/EL positioner
- Aerodynamic casing and antenna locking system
- for high speed travel up to 120km/h
SKYRAY Compact
The ND SATCOM SKYRAY Compact series is uniquely designed for both form and function. The aerodynamic cases can be easily and quickly roof-mounted on most vans or all-terrain vehicle models. - Diamond shape reflector - 1.5m diagonal antenna diameter - Eutelsat Type approved - Carbon-fiber casing - Easy to mount 6 pad interface - Tx Gain: 44,5dBi (typical) - Rx Gain: 43dBi (typical) | |
| SKYRAY Compact 1500 | SKYRAY Compact 1500plus |
 |  |
Dimensions (LxWxH): L = 2200 mm W = 1560 mm H = 630 mm (stowed) | Dimensions (LxWxH): L = 2200 mm W = 1560 mm H = 630 mm (stowed) |
Options: | Options: |
SSPA mounting kit | SSPA mounting kit |
400W HPA | 400W HPA |
HPA mounting kit | HPA mounting kit |
APS (automatic pointing system) - DVB - SKYWAN | APS (autmomatic pointing system) - DVB - SKYWAN |
1 + 1 redundant HPA mounting kit | |
SKYRAY MAS
These mobile antenna subsystems can be mounted on any appropriately prepared vehicle. The high performance antenna reflector teamed with the robust motorized mount create the ideal combination to serve the need for reliable SNG transmissions. This system is fully waterproof and designed for continuous operation even under harsh environmental conditions. - Diamond shape reflector - Eutelsat characterized Options: - SSPA mounting kit - 400W HPA - HPA mounting kit - 1+1 redundant HPA mounting kit - APS (automatic pointing system) - DVB - SKYWAN
SKYRAY MAS 1900
Ku-Band Tx Gain: 46dBi (typical) Rx Gain: 44dBi (typical) Optionally: C, X and DBS Band Dimensions (LxWxH): L = 1815 mm W = 1530 mm H = max. 600 mm (stowed) |
2.4m Mobile Station
Compact SatCom Station Solution for Mobile Use.This mobile station design for disaster recovery, crisis management, emergency response or interim/backup uplinks uses our field proven platform that comes with flexible transport options and easy set-up.
Core element of this mobile station is our 2.4m self-supporting antenna supporting C, Ku, DBS and Ka-Band. The terminal provides plenty of space for electronic equipment in its 24RU climate controlled vibration-cushioned rack space. A built-in power generator allows permanent stand-alone operation.
Key features:
- Built for autonomous field operation; self-supporting
- Universal Transportability Module
- 20 ft ISO container or single-axle trailer
High Power Amplifier
ND SatCom offers a range of Ku-Band and DBS Band HPAs, which can be delivered either as Indoor or Outdoor versions. In addition to these mainly in a commercial environment used HPAs, 500W Tri-Band (C/X/Ku) outdoor units are offered. Optionally the majority of the models are offered with an integrated BUC (block up-converter) and/or with a Linearizer. This range of high quality, “Made in Germany”, products nicely fit into Systems like TV-Uplinks, HUB Stations, Anchor Station as well as SNG vehicles and other transportable Earth Stations. Our portfolio for the TWT amplifiers also include Front Panel Controllers, Standardized Redundancy set-ups like 1+1 / 2+1 and 3+1, Customized Redundancy set-ups and n+1 redundant systems including filter/combiner networks.
Ku-/DBS-Band Indoor Units
All our indoor high power amplifiers (HPA) combine the following key advantages: - Low power consumption - Light weight - Small dimensions - Unmatched RF performance - Low phase noise (typ. IESS 308/309) - High-tech power supply for highly reliable operation - Integrated power factor correction - CPI VZU... Remote protocol compliant | |
 |  |
400W Ku-Band Indoor Units Low power consumption (max. 1250W) | 750W Ku-/DBS-Band Indoor Units Low power consumption (max. 2350W) |
400W Ku-Band (12,75 - 14,5 GHz) HPA3412A HPA 3412AL with integrated Linearizer | 750W Ku-Band (12,75 - 14,5 GHz) HPA 2712A HPA 2712AL with integrated Linearizer |
400W Ku-Band (13,75 - 14,5 GHz) | 750W Ku-Band (13,75 - 14,5 GHz) |
HPA3413A | HPA2713A |
HPA3413AL with integrated Linearizer | HPA2713AL with integrated Linearizer |
HPA3413AU with integrated BUC | |
HPA3413AUL with integrated BUC and Linearizer | |
| 750W DBS Band (17,3 - 18,4 GHz) | |
Low power consumption (max. 2350W) | |
HPA2717A | |
HPA2717AL with integrated Linearizer | |
Ku-/DBS-/TRI-Band Outdoor Units
All our outdoor high power amplifiers (HPA) combine the following key advantages: - Low power consumption - Light weight - Small dimensions - Unmatched RF performance - Low phase noise (typ. IESS 308/309) - High tech power supply for highly reliable operation - Integrated power factor correction - CPI VZU... Remote protocol compliant | |
 |  |
| 400W Ku-Band Outdoor Units | 750W Ku-/DBS-Band Outdoor Units |
Low power consumption (max. 1250W) | Low power consumption (max. 2350W) |
Small dimensions (primarily tailored to best fit into ND SATCOM's SKYRAY MAS or SKYRAY compact SNG antennas). | Small dimensions (only 3RU) |
400W Ku-Band (12,75 - 14,5 GHz) HPA3412B HPA 3412BL with integrated Linearizer | 750W Ku-Band (12,75 - 14,5 GHz) HPA 2712B HPA 2712BL with integrated Linearizer |
400W Ku-Band (13,75 - 14,5 GHz) | 750W Ku-Band (13,75 - 14,5 GHz) |
HPA3413B | HPA2713B |
HPA3413BL with integrated Linearizer | HPA2713BL with integrated Linearizer |
HPA3413BU with integrated BUC | HPA2713BU with integrated BUC |
HPA3413BUL with integrated BUC and Linearizer | HPA2713BUL with integragted BUC and Linearizer |
| 750W DBS-Band (17,3 - 18,4 GHz) | |
HPA2717B | |
HPA2717BL with integrated Linearizer HPA2717BU with integrated BUC HPA2717BUL with integrated BUC and Linearizer | |
 | |
| 500W TRI-Band | |
Low power consumption (max. 1750W) Small dimensions Compliant to MIL-STD810F | |
| HPA2500BL with integrated Linearizer | |
| HPA2500BU with integrated BUC | |
| HPA2500BUL with integrated BUC and Linearizer | |
- HPA2713BU 750W Ku-Band Outdoor (605.48 KB)
- HPA2712B 750W ext Ku-Band Outdoor (552.52 KB)
- HPA3413BU 400W Ku-Band Outdoor (631.81 KB)
- HPA2713B 750W Ku-Band Outdoor (552.28 KB)
- HPA3412B 400W ext Ku-Band Outdoor (578.95 KB)
- HPA3413B 400W KU-Band Outdoor (578.37 KB)
- HPA2500B 500W TRI-Band Outdoor (399.32 KB)
- HPA2717B 750W DBS-Band Outdoor (551.86 KB)
- HPA2717BU 750W DBS-BAND Outdoor (605.33 KB)
Standard Waveguide Switching Systems
The Waveguide Switching System is ideally suited to the RCU 5000 series and HPA (Ku-Band / DBS-Band) series manufactured by NDSATCOM. Predefined cable sets enable easy integration of the complete redundant system in standard 19 inch indoor rack or dedicated designed outdoor frame. The best choice for high performance redundancy applications.
Available configurations
| Ku-Band | DBS-Band | TRI-Band |
| 1:1 | X | X | X |
| 2:1 | X | X | |
| 3:1 | X | X |
- Indoor and Outdoor Versions
- Automatic Redundancy Switching
- Easy integration of High Power Amplifiers (HPA)
- Standard cable set
Product videos
- RCU 5000 Datasheet (1.04 MB)
- WAVEGUIDE_1+1_400W_Ku-Band_Outdoor (351.07 KB)
- WAVEGUIDE_1+1_750W_DBS-Band_Outdoor (363.19 KB)
- WAVEGUIDE_1+1_750W_Ku-Band_Outdoor (350.43 KB)
- WAVEGUIDE_2+1_750W Ku-Band_Outdoor (393.34 KB)
- WAVEGUIDE_2+1_750W_DBS-Band_Indoor (514.95 KB)
- WAVEGUIDE_2+1_750W_DBS-Band_Outdoor (431.34 KB)
- WAVEGUIDE_2+1_750W_Ku-Band_Indoor (514.44 KB)
- WAVEGUIDE_1+1_750W_DBS-Band_Indoor (466.52 KB)
- WAVEGUIDE_1+1_750W_Ku-Band_Indoor (474.96 KB)
Customized Waveguide Switching System
According to your needs we will supply as well:- Customized form factor
- Channel combining; Filter Combiners, Hybrids
- Calibrated measurement couplers
- Waveguide Dehydration
Mobile Terminals / Military SatCom
An increasing number of out-of-area missions require a communication network which can receive and broadcast information with the utmost reliability at all times. ND SatCom offers a wide range of mobile and transportable satellite ground terminals in tri-band (C-, X- and Ku-Band) or single band configuration up to Ka-Band. They are designed for rapid set-up and operation under harsh environmental conditions, and are available in different mechanical configurations, from trailer or vehicle-mounted to Fly-Away configurations in transport boxes. All components have been proven in many military and commercial applications. They are fully compliant with military and commercial standards like MIL-STD, STANAG, DISA, ETSI and ITU.
MTT 2400
Compact SatCom Solution for Military Missions.Whenever in need of an easily deployable, self contained multiband satellite terminal to support your missions, the MTT2400 is the terminal of choice!
The MTT2400 is based on an ultra compact platform and is designed for easy transportation and set-up. With its rapid band switching capability and 34 RU free rack space it provides utmost versatility and flexibility and can meet almost all network requirements. The terminal can be monitored and controlled remotely via satellite. A built-in power generator allows permanent stand-alone operation.
Universal Transportability Concept
- 10 ft ISO container footprint
- Trailer and truck bed mountable
- Sea transport in ISO standard 20 ft container
- Rail carriage
- Air transportable in most commercial and military aircrafts
MTT 4600
High Capacity SatCom Solution for Military Missions.Whenever in need of a robust satellite terminal for strategic applications, the MTT4600 is the terminal of choice!
The MTT4600 system is available in C-, X-, Ku- and tri-band configuration. The 4.6 m antenna, together with the RF equipment, is mounted on a trailer and automatically folds into a compact unit without any disassembling. It requires a towing capability of approximately 5 tons and is air transportable aboard C-130 and C-160 aircraft. The system is set up and ready for transmission in less than 60 minutes. With the MTT4600 you quickly deploy your network, wherever you need it. It covers a large variety of applications, and is ideally suited, e.g. as in-theater network hub.
Your Sales Contact worldwide
